Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, April 2009)

214 Fabric OS Command Reference

53-1001186-01

fcipHelp

Displays FCIP command information.

Synopsis fciphelp

Description Use this command to display a short description of Fibre Channel over IP (FCIP) commands. FCIP

commands require an FCIP license.

Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may

be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command

Availability" for details.

Operands none

Examples To display FCIP command information:

switch:admin> fciphelp

fastwritecfg Configure FC fastwrite feature

portcfg Create/Delete a new ip interface/route/arp entry or

fcip tunnel on the GigE port

portcmd Execute commands (ping etc) on the GigE port

portshow Show configured ip interfaces/routes/arp entries or

fcip tunnels on the GigE Port

See Also fastWriteCfg, portCfg, portCmd, portShow