Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, April 2009)

184 Fabric OS Command Reference
53-1001186-01
errClear
2
errClear
Clears all error log messages for all switch instances on this control processor (CP).
Synopsis errclear
Description Use this command to clear all internal and external error log messages for all switch instances on
the CP where the command is executed. For products that have a single processor, all error log
messages are cleared. For products that contain multiple processors , this command does not
affect the error logs of the other processor. This command must be executed on the active CP.
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands none
Examples To clear the error log messages:
switch:admin> errclear
See Also errDump, errShow