Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, April 2009)

Fabric OS Command Reference xxi
53-1001186-01
• portCfgFportBuffers
• setContext
The following commands have been modified to support new command options:
• ad --clear - New -f option to remove all Admin Domains before enabling Virtual Fabrics.
• auditCfg - New operand to set severity for audit messages.
• authUtil - Support for device authentication policy “on” mode.
• configDefault - New -all and -fid operands to support Logical Fabrics.
• configDownload - New -all -chassis, -fid, and -template operands to support Logical
Fabrics.
• configShow - New -all -chassis, and -fid, operands to support Logical Fabrics.
• configUpload - New -all -chassis, -fid, and -template operands to support Logical Fabrics.
• configure - New operands to configure port area, XISL use, and disable FID check. This
command now only configures switch configuration. There is a new command to configure
chassis parameters (configureChassis).
• cryptoCfg - New operands to support HP SKM key vault and certificate exchange/node
registration. New operands to support routing policy configuration. Removed volume label
parameter from --add -LUN command.
• errDump, errShow - New -a operand to support admin chassis role. The -s and -p operands
are deprecated.
• fabricPrincipal - New option to enable, disable, and display priority settings.
• fcPing - Now works with single destination. Syntax changed form single-dash letter to
double-dash word format for parameters.
• fcrXlateConfig - New option to specify whether or not to create the xlate domain if no
devices are imported or exported across the fabrics.
• fosConfig - New -vf parameter to enable or disable Virtual Fabrics.
• iclCfg - New operands to disable or enable an ICL persistently.
• ifModeSet, ifModeShow - Support for Ethernet bonding.
• ipAddrSet - New operands to support Logical Switch and chassis configuration and IPv6
auto configuration. Deprecated -sw operand, replaced with -chassis.
• ipAddrShow - The -sw operand has been replaced with -chassis.
• iodSet - New operand to support IOD without frame drop (lossless DLS).
• islShow - Updated for logical fabrics.
• pathInfo - New option to support traceroute. Support for logical Fabrics (FID).
• portCamShow - No longer executable without operands. Needs port operand.
• portCfgExport - Support for Mi10k director in 239 domain ID mode.
• portCfgLongDistance - The vc_translation_link_init parameter has been modified to set
fillwords.
• portCfg - New operands to support FCIP inband management, interface IP address and
route configuration, byte streaming, and FCIP read Tape Piplelining.
• portCfgShow - New parameters to support port auto disable and inband management.