Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, April 2009)

Fabric OS Command Reference 169

53-1001186-01

diagDisablePost

Disables power-on self-test (POST).

Synopsis diagdisablepost

Description Use this command to disable POST. A reboot is not required for this command to take effect.

Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may

be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command

Availability" for details.

Operands none

Examples To disable the POST:

switch:admin> diagdisablepost

Config update Succeeded

Diagnostic POST is now disabled.