Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, April 2009)

Fabric OS Command Reference 137
53-1001186-01
cryptoCfg
2
- Number of uncompressed blocks
- Number of compressed blocks
- Number of uncompressed bytes
- Number of compressed bytes
Use the --show -rekey command to display all re-key sessions in progress in the encryption group
or for a specified container. The display includes the following information:
• Number of re-key sessions in progress
• For each re-key session, the display includes:
- Container name
- EE node: node WWN
- EE slot: Slot number
- Target PWWN
- Target NWWN
- Target PID
- VT PWWN
- VT NWWN
- VT PID
- Host (initiator) PWWN
- Host (initiator) NWWN
- Host (initiator) PID
- VI PWWN
- VI NWWN
- VI PID
- LUN Number
- LUN Serial Number
- Percentage complete
- Re-Key state: Displays one of the following:
• Read Phase
• Write Phase
• HA Sync Phase
• LUN Cleanup
- Re-key role: Primary or Backup
- Block Size
- Current logical block address (LBA) being processed
Use the --show -rekey crypto_target_container_name LUN_Num initiator_PWWN command to
display all re-key sessions in progress for a specific Crypto LUN/initiator pair of a specific
CryptoTarget container. The display includes the following information:
• LUN number
• LUN Serial Number (SN)
• CryptoTarget container Name: user-defined name