Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, April 2009)

Fabric OS Command Reference 133
53-1001186-01
cryptoCfg
2
- Container name: (user-generated name)
- Type: disk or tape
- EE node: node WWN
- EE slot: slot number
- EE hosting container
- Target: target port WWN
- Target PID: target PID
- VT: virtual target port WWN
- VT PID: virtual target PID
- Number of hosts
- Number of tape sessions (or re-key sessions)
- Host: port WWN
- Host PID: host PID
- VI: virtual initiator port WWN
- VI PID: virtual initiator PID
- Number of LUNs
- LUN number
- LUN type: disk or tape
- LUN serial number:
- Encryption mode: encrypt or cleartext
- Encryption format: (brocade) native or DF-compatible
- Tape type
- Encrypt existing data: disabled or enabled
- Rekey: disabled or enabled
- Key life: key lifespan (in days)
- Volume/Pool label
- LUN state: Encrypted, Cleartext, or Disabled (Data state is cleartext but metadata exists on
the LUN, or vice versa.)
- Encryption algorithm: AES256 -XTS (disk), AES256-CCM (tape), or none
- Key ID state: Read, Write, or Key ID not applicable
- Key ID
- Tape session number
- Number of uncompressed blocks
Use the --show -container -all -cfg command for configuration information on all CryptoTarget
containers in the encryption group, or specify a crypto_target_container_name for information on a
specified CTC. The display includes the following information:
• Encryption group name
• Number of containers
• For each container:
- Container name: user-defined name