Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, April 2009)

112 Fabric OS Command Reference
53-1001186-01
configure
2
switch:admin>configure
Configure...
Change fabric parameters? Y
Change domain[30]:
Allow XISL Use [no]: yes
Enable a 256 Area Limit[0]:
R_A_TOV: (4000..120000) [10000]
E_D_TOV: (1000.. 5000) [2000]
WAN_TOV: (0..30000) [0]
MAX_HOPS: (7..19) [7]
Data field size: (256..2112) [2112]
Sequence Level Switching: (0..1) [0]
Disable Device Probing: (0..1) [0]
Suppress Class F Traffic: (0..1) [0]
Per-frame Route Priority: (0..1) [0]
Long Distance Fabric: (0..1) [0]
BB credit: (1..27) [16]
Disable FID Check (yes, y, no, n): [no]
Virtual Channel parameters (yes, y, no, n): [no]
F-Port login parameters (yes, y, no, n): [no]
Zoning Operation parameters (yes, y, no, n): [no]
RSCN Transmission Mode (yes, y, no, n): [no]
Arbitrated Loop parameters (yes, y, no, n): [no]
System services (yes, y, no, n): [no]
Portlog events enable (yes, y, no, n): [no]
ssl attributes (yes, y, no, n): [no]
rpcd attributes (yes, y, no, n): [no]
webtools attributes (yes, y, no, n): [no]
swtch:admin> switchenable
:See Also configDefault, configShow, configureChassis, ipAddrSet, portCfgLongDistance,
switchDisable, switchEnable, upTime