Brocade Fabric OS Command Reference Manual Supporting Fabric OS v6.4.0 (53-1001764-01, March 2010)

930 Fabric OS Command Reference
53-1001764-01
switchShow
2
Index Port index is a number between 0 and the maximum number of supported
ports on the platform. The port index identifies the port number relative to the
switch.
Slot Slot number; 1-12
Port Port number; 0-15, 0-31, or 0-47.
Address The 24-bit Address Identifier.
Media Media types include:
-- No module present. Applicable to all port types.
cu Displays when the copper (default) GbE port ge0 or ge1 is active (refer to
portCfgGeMediaType for more information). If the optical GbE port is active
and an SFP is installed (copper or optical), “id” is displayed. If nothing is
installed on the optical port, the Media field shows “--”. The “cu” field also
displays for interchassis links (ICLs).
id Serial ID. Indicates that an SFP is installed. Use sfpShow to get more
information about the SFP, including the serial number.
Speed The speed of the port:
1/8G 125 Mbps
1/4G 250 Mbps
1/2G 500 Mbps
1G 1 Gbps fixed transfer speed
N1 1 Gbps negotiated transfer speed
2G 2 Gbps fixed transfer speed
N2 2 Gbps negotiated transfer speed
4G 4 Gbps fixed transfer speed
N4 4 Gbps negotiated transfer speed
8G 8 Gbps fixed transfer speed
N8 8 Gbps negotiated transfer speed
10G 10 Gbps fixed transfer speed
N10 10 Gbps negotiated transfer speed
AN Autonegotiating
UN Unknown
State Port state information:
No_Card No interface card present.
No_Module No module (GBIC or other) present.
Mod_Val Module validation in process.
Mod_Inv Module speed mismatch or incompatible SFP.
No_Light The module is not receiving light.