Brocade Fabric OS Command Reference Manual Supporting Fabric OS v6.4.0 (53-1001764-01, March 2010)

Fabric OS Command Reference 915

53-1001764-01

supportShowCfgDisable

Disables a group of commands under the supportShow command.

fcip

Description Use this command to disable a group of commands under the supportShow command. Use the

supportShowCfgEnable command to enable groups of commands.

The FCIP commands are supported only on the Brocade 7800/FX8-24 and 7500/7500E/FR4-18i

platforms and cannot be configured to collect data on unsupported platforms.

Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may

be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command

Availability" for details.

Operands This command has the following operands:

os Disables the OS group commands.

exception Disables the exception group commands.

port Disables the port group commands.

fabric Disables the fabric group commands.

services Disables the service group commands.

security Disables the security group commands.

network Disables the network group commands.

portlog Disables the portlog group commands.

system Disables the system group commands.

extend Disables the extend group commands.

filter Disables the filter group commands.

perfmon Disables the Performance Monitor group commands

ficon Disables the FICON group commands.

iswitch Disables the FC Router group commands.

asic_db Disables the ASIC DB group commands.

iscsi Disables the iSCSI group commands.

ag Disables the Access Gateway group commands.

dce_hsl Disables the DCE group commands.

crypto Disables the encryption group commands

fcip Disables the FCIP group commands. Supported only on the Brocade

7800/FX8-24 and 500/7500E/FR4-18i.