Brocade Fabric OS Command Reference Manual Supporting Fabric OS v6.4.0 (53-1001764-01, March 2010)

Fabric OS Command Reference 41

53-1001764-01

agShow

Displays the Access Gateway information registered with the fabric.

Synopsis agshow --name [ag_name] | [--local]

Description This command displays the details of the F_Ports and the configured N_Ports in the Access

Gateway attached to the fabric shows the following information.

Name The name of the Access Gateway.

Ports The number of ports in the Access Gateway.

Enet IP Addr The IP address of the Access Gateway.

Firmware Current firmware running on the Access Gateway.

Local/Remote Indicates whether the Access Gateway is locally or remotely registered to this

switch.

World Wide Name The world wide name (WWN) of the given Access Gateway.

N-Port ID(s) The port ids of the N_Ports configured in the given Access Gateway.

N-Ports The number of configured N_Ports that are online.

F-Ports The number of F_Ports that are online.

Attached F-Port information

Displays the PortID and the Port WWN of each F_Port that is online on the

Access Gateway.

Note NPIV capability should be enabled on the ports connected to the Access Gateway. NPIV capability is

by default enabled. Use portCfgNPIVPort to enable NPIV capability a port if it was previously

disabled. Note that enabling or disabling NPIV capability is no longer supported in Access Gateway

mode.

Operands This command has the following optional operands:

ag_name Use this option to display the information regarding a specific Access

Gateway that is registered with this fabric.

--local Use this option to display the information of all Access Gateways that are

locally registered to this switch

Examples To display the Access Gateway information registered with the fabric:

switch:admin> agshow --name WT_Stealth

Name : WT_Stealth

World Wide Name : 10:00:00:05:1e:34:e4:bd

N-Port ID(s) : 0x010200

Number of Ports : 16

IP Address(es) : 10.202.90.231

Firmware Version : v1.0.0

N-Ports : 1

F-Ports : 2

Attached F-Port information:

PortID Port WWN

----------------------------------