Brocade Fabric OS Command Reference Manual Supporting Fabric OS v6.4.0 (53-1001764-01, March 2010)

640 Fabric OS Command Reference
53-1001764-01
portCfgAutoDisable
2
To enable the auto-disable feature on a range of ports, some of which were previously enabled
(The following example enables port 4):
switch:admin> portcfgautodisable --enable 2-4
Same configuration for port 2
Same configuration for port 3
To disable the auto-disable feature on a port range.
switch:admin> portcfgautodisable --disable 0-8
See Also portCfgShow, portEnable