Brocade Fabric OS Command Reference Manual Supporting Fabric OS v6.4.0 (53-1001764-01, March 2010)

Fabric OS Command Reference 637

53-1001764-01

portCfg

Examples To configure the internal addresses for the CP and GbE port inband management interfaces:

switch:admin> portcfg inbandmgmt ge0 ipaddrset cp 192.168.255.1 255.255.255.0

switch:admin> portcfg inbandmgmt ge0 ipaddrset ge 192.168.255.2 255.255.255.0

To add a route to a management station that is on the same subnet as the management interface

IP addresses in the previous example:

switch:admin> portcfg inbandmgmt ge0 routeadd 192.168.3.0 255.255.255.0

To configure a route for a management station that is on a different subnet (note the added

gateway IP address):

switch:admin> portcfg inbandmgmt ge0 routeadd 192.168.3.0 255.255.255.0 192.168.1.250

See Also portCfgShow, portCmd, portShow, switchShow, configure, fastWriteCfg