Brocade Fabric OS Command Reference Manual Supporting Fabric OS v6.4.0 (53-1001764-01, March 2010)

606 Fabric OS Command Reference

53-1001764-01

portAlpaShow

Displays the Arbitrated Loop Physical Addresses (AL_PAs) of devices attached to a port.

Synopsis portalpashow [slot/]port

Description Use this command to display the AL_PAs of devices connected to a port, and whether these

devices are public or private. If the specified port is not an active FL_Port or if no AL_PAs are

present, this command prints an error.

Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may

be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command

Availability" for details.

Operands This command has the following operands:

slot For bladed systems only, specify the slot number of the port to display,

followed by a slash (/).

port Specify the port number to display, relative to its slot for bladed systems. Use

switchShow to list valid ports.

Examples To display the AL_PAs of a port:

switch:user> portalpashow 4/14

AL_PA type AL_PA type AL_PA type

0xe2 public 0xe4 public