Brocade Fabric OS Command Reference Manual Supporting Fabric OS v6.4.0 (53-1001764-01, March 2010)

414 Fabric OS Command Reference

53-1001764-01

interopMode

InteropMode: McDATA Open Fabric ( IM3 )

Domain Id offset: 0xff

To try to switch from 239 Domain ID mode in IM3 to IM 2 (this command fails unless you change

the domain offset as well to a value supported in IM2):

switch:admin> interopmode --enable -mcdata

The switch effective and defined configuration

will be lost if interop Mode is changed.

Interop Mode or Domain Offset Will Be Changed

and switch will be Enabled

Do you want to continue? (yes, y, no, n): [no] y

InteropMode Offset: Failed to set offset 239 does not exist for IM2

rc 0, err 0, msg VÜÉ

See Also cfgMcdtMode, cfgSaveActiveToDefined