Brocade Fabric OS Command Reference Manual Supporting Fabric OS v6.4.0 (53-1001764-01, March 2010)

378 Fabric OS Command Reference

53-1001764-01

fwSet

Sets port persistence time.

Synopsis fwset --port --persistence seconds

Description Use this command to set port persistence time, a parameters controlled by Fabric Watch. Port

persistence time specifies the time in seconds during which a port must persistently be in a

marginal state before being labeled as such. port persistence is a switch-wide parameter. Use

portThconfig to display port persistence time.

Notes This command requires a Fabric Watch license.

The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may

be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command

Availability" for details.

Operands The following operands are required:

--port --persistence seconds

Specifies the time, in seconds, during which a port must be persistently in a

marginal state before being recognized as such.

Examples To set the port persistence time to 18 seconds:

switch:user> fwset --port --persistence 18