Brocade Fabric OS Command Reference Manual Supporting Fabric OS v6.4.0 (53-1001764-01, March 2010)

362 Fabric OS Command Reference

53-1001764-01

fwClassInit

Initializes all classes under Fabric Watch.

Synopsis fwclassinit

Description Use this command to initialize all classes under Fabric Watch. The command should only be used

after installing a Fabric Watch license to start licensed Fabric Watch classes. Refer to the Fabric

Watch Administrator’s Guide for a list of supported Fabric Watch classes.

Notes This command requires a Fabric Watch license.

The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may

be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command

Availability" for details.

Operands none

Examples To initialize all classes under Fabric Watch:

switch:admin> fwclassinit

fwClassInit: Fabric Watch is updating...

fwClassInit: Fabric Watch has been updated.

See Also fwConfigReload, fwHelp, portFencing, portThConfig, thConfig, sysMonitor