Brocade Fabric OS Command Reference Manual Supporting Fabric OS v6.4.0 (53-1001764-01, March 2010)

324 Fabric OS Command Reference
53-1001764-01
ficonShow
2
Switch node WWN Displays the switch node world wide name.
Switch Port WWN Displays the switch port world wide name.
Switch WWN Displays the switch WWN.
Tag Displays the physical identifier for the self-describing node interface.
TS Format Displays the Time Server format.
Time Stamp Displays the timestamp, expressed in date format.
Type Same as Port Type.
Type Number Displays the type number of the self-describing node. It also describes the
machine type.
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands This command has the following operands:
database Specify the database to display. This operand is required. Valid values are:
RNID Device node identification.
LIRR Devices registered to receive link incident reports. Entries can have the
following flags:
-C* A user-configured LIRR entry defined as current (set with the ficonCfg
command).
-C A LIRR entry defined by the management server demon as current based
on order.
-S A LIRR entry defined by the management server demon as secondary.
SwitchRNID Switch node identification.
RLIR Link incident reports.
ILIR Implicit link incident reports.
fabric Displays FICON database information for the entire fabric. This operand is
optional; if omitted, only local members of the named database are
displayed.
Examples To display the local RNID database:
switch:admin> ficonshow RNID
{
{Fmt Type PID Registered Port WWN Registered Node WWN flag Parm
0x18 N 502b00 50:05:07:64:01:00:15:8d 50:05:07:64:00:c1:69:ca 0x10
0x200110
Type number: 002064
Model number: 101
Manufacturer: IBM
Plant of Manufacture: 02
Sequence Number: 0000000169CA
tag: 102b
}
{Fmt Type PID Registered Port WWN Registered Node WWN flag Parm