Brocade Fabric OS Command Reference Manual Supporting Fabric OS v6.4.0 (53-1001764-01, March 2010)

314 Fabric OS Command Reference

53-1001764-01

ficonCfg

Configures the specified FICON database.

Synopsis ficoncfg --set database port_index

ficoncfg --reset database

ficoncfg --help

Description Use this command to configure a FICON database on a specified port. Refer to ficonShow for a

description of the database content.

Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may

be in place. Refer to chapter 1, “Using Fabric OS commands” and Appendix A, “Command

Availability” for details.

Operands This command has the following operands:.

port_index Specifies the port to be configured by its port index. Use switchShow for a

listing of valid port index numbers.

--set Sets the configuration entry.

--reset Resets the configuration entry to its default value.

database Specifies the name of the FICON database. The only database currently

supported is the follwoing:

LIRR Devices registered to receive link incident reports.

Examples To set the LIRR database on port 5:

switch:user> ficoncfg --set LIRR 5

To reset the LIRR

switch:user> ficoncfg --reset LIRR