Brocade Fabric OS Command Reference Manual Supporting Fabric OS v6.4.0 (53-1001764-01, March 2010)

Fabric OS Command Reference 239
53-1001764-01
fabStatsShow
2
fabStatsShow
Displays fabric statistics.
Synopsis fabstatsshow
Description Use this command to display statistics for the fabric. The following information is displayed:
Description Description of the incident tracked including the following:
• Number of times a switch domain ID has been forcibly changed
• Number of E_Port offline transitions
• Number of fabric reconfigurations
• Number of fabric segmentations resulting from any of the following
causes:
•Loopback
•Incompatibility
•Overlap
•Zoning
•E_Port segment
•Licensing
•Disabled E_Port
•Platform DB
•Security incompatibility
•Security violation
•ECP error
•Duplicate WWN
•E_Port isolated
•Admin Domain header conflict
•DomainID offset conflict
•McData SafeZone conflict
•Virtual Fabric Admin Domain conflict
•MSFR/RD H&T WWN conflict (internal only)
•Enhanced/Overlapping TI zones (ETIZ) Incompatibility
•Exchange Switch Capabilities (ESC) detected conflict
For each recorded incident, the command provides the following additional information:
count The total number of times the specific event occurred on various ports on the
switch.
port The number of the port where the latest incident occurred. An “<“ next to the
port number denotes the type of event that occurred last.
timestamp The time when the latest incident occurred.
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands none