Brocade Fabric OS Command Reference Manual Supporting Fabric OS v6.4.0 (53-1001764-01, March 2010)

Fabric OS Command Reference 167
53-1001764-01
cryptoCfg
2
• Number of hosts: numeric value
• Number of rekey (or tape) sessions: numeric value
• For each host:
- Host PWWN, NWWN: host port WWN and node WWN
- Host PID: host port ID
- VI PWWN, NWWN: virtual initiator port WWN and node WWN
- VI PID: virtual initiator port ID
• Number of LUNs: numeric value
• For each LUN:
- LUN number: numeric value
- LUN type: disk, tape drive, tape medium changer, tape attached medium changer,
offline/unknown, or unsupported/other
- LUN serial number: alpha-numeric ID
- Encryption mode: encrypt or cleartext
- Encryption format: native or DF-compatible
- Encrypt existing data: enabled or disabled
- Rekey: enabled or disabled
- Tape policy type: pool-based or LUN-based
- Key life: key lifespan in days
- Volume/pool label
- LUN state: Refer to the Fabric OS Encryption Administrator’s Guide.
- Encryption algorithm: AES256 -XTS (disk), AES256-CCM (tape), or none
- Compression algorithm
- Key ID state: available or not available
- Key ID: numeric identifier if available
- New LUN: Yes or No
- Replication LUN type: Primary or Mirror
When used with -cfg the --show -LUN command displays LUN configuration information:
• EE node: node WWN
• EE slot: slot number
• Target: target port WWN and node NWWN
• VT: virtual target port WWN and node WWN
• Number of hosts: numeric value
• Configuration status: committed or defined
• For each host:
- Host port WWN and node WWN
- Virtual initiator port WWN and node WWN
- Virtual initiator PID
• Number of LUNs