Brocade Fabric OS Command Reference Manual Supporting Fabric OS v6.4.0 (53-1001764-01, March 2010)

Fabric OS Command Reference 143
53-1001764-01
configureChassis
2
Custom Attributes
Table 15 lists custom attributes that may be modified.
config Index OEM custom configuration. This attribute is for internal use only.
System Settings
The following system-related parameters are configurable on a Virtual Fabric-aware switch.
system.blade.bladeFaultOnHwErrMsk
If this field is set to a value other than 0, then any nonfatal HW ASIC data
parity error causes the problem blade to be powered off.
system.cpuLoad Sets a threshold to define internally when the CPU is busy. The default
threshold is 121, which represents a CPU instantaneous load average of
1.21 in the uptime or top command. The range is 10 through 121
(representing CPU load thresholds of .10 through 1.21).
Examples To enable signature validation for downloading firmware:
switch:admin> configurechassis
Configure...
cfgload attributes (yes, y, no, n): [no] \fBy\fR
Enforce secure config Upload/Download (yes, y, no, n): [no]
Enforce signature validation for firmware (yes, y, no, n): [no]
Custom attributes (yes, y, no, n): [no] \fBy\fR
Config Index (0 to ignore): (0..1000) [0]
system attributes (yes, y, no, n): [no] \fBy\fR
system.blade.bladeFaultOnHwErrMsk: (0x0..0xffff) [0x0]
system.cpuLoad: (10..121) [121]
See Also configDefault, configShow, chassisEnable, chassisDisable, configure, ipAddrSet,
portCfgLongDistance, switchDisable, switchEnable, upTime
TABLE 15 Configurable custom attributes
Application Attribute Type Default Range
Custom Config Index (0 to ignore): Number 0 0-10000
TABLE 16 System Settings
Field Type Default Range
system.blade.bladeFaultOnHwErrMsk
Number 0x0
0x0 to 0xffff
system.cpuLoad
Number 121 10 to 121