Brocade Fabric OS Command Reference Manual Supporting Fabric OS v6.4.0 (53-1001764-01, March 2010)

Fabric OS Command Reference 133
53-1001764-01
configure
2
Operands none
The configure command runs in interactive mode and presents you with a series of hierarchical
menus. Each top-level menu and its associated submenus consist of a text prompt, a selection of
valid values, and a default value (in brackets).
The following keys control the execution of the command:
Return When entered at a prompt with no preceding input, the command accepts
the default value (if applicable) and moves to the next prompt.
Interrupt (Ctrl-C) Aborts the command immediately and ignores all changes made.
End-of-file (Ctrl-D) When entered at a prompt with no preceding input, terminates the command
and saves changes made.
The following parameters can be modified with the configure command:
Switch Fabric Settings
Fabric settings control the overall behavior and operation of the fabric. Some of these settings,
such as the domain, are assigned automatically and may differ from one switch to another in a
given fabric. Other parameters, such as buffer-to-buffer credit or timeout values, can be modified
to suit specific applications or operating environments but must be in agreement among all
switches to allow formation of the fabric.
Table 6 lists the switch fabric settings that can be modified.
TABLE 6 Configure command fabric parameters (* = multiplication symbol)
Field Type Default Range
Domain number 1 varies
Enable a 256 Area Limit number 0 0 to 2
WWN Based persistent PID boolean no yes or no
Allow XISL Use boolean yes yes or no
R_A_TOV number 10000 E_D_TOV * 2 to 120000
E_D_TOV number 2000 1000 to R_A_TOV / 2
WAN_TOV number 0 0 to R_A_TOV / 4
MAX_HOPS number 7 7 to 19
Data Field Size number 2112 256 to 2112
Sequence Level Switching boolean 0 0 or 1
Disable Device Probing boolean 0 0 or 1
Suppress Class F Traffic boolean 0 0 or 1
Per-frame Route Priority boolean 0 0 or 1
Long Distance Fabric boolean 0 0 or 1
BB Credit number 16 1 to 27
Disable FID Check boolean no yes or no
Insistent Domain ID Mode boolean no yes or no