Brocade Fabric OS Command Reference Manual Supporting Fabric OS v6.3.0 (53-1001337-01, July 2009)

Fabric OS Command Reference 889

53-1001337-01

trackChangesShow

Displays status of the track-changes feature.

Synopsis trackchangesshow

Description Use this command to display status of the track-changes feature. It shows whether the feature is

enabled or disabled and if SNMP traps are generated.

The output from the track-changes feature is dumped to the error log for the switch. Use the

errDump command or errShow command to view the error log.

Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may

be in place. Refer to chapter 1, "Using Fabric OS Commands" and Appendix A, "Command

Availability" for details.

Operands none

Examples To display the status of the track-changes feature:

switch:admin> trackchangesshow

Track changes status: ON

Track changes generate SNMP-TRAP: YES

See Also trackChangesHelp, trackChangesSet