Brocade Fabric OS Command Reference Manual Supporting Fabric OS v6.3.0 (53-1001337-01, July 2009)

50 Fabric OS Command Reference

53-1001337-01

auditDump

Displays or clears the audit log.

Synopsis auditdump -s | -show

auditdump -c | -clear

Description Use this command to display or clear the audit log on the switch. The audit log persistently saves

the most recent 256 log entries on the switch. On modular platforms, the entries are not shared

across CPs. To display or clear the logs, this command must be issued for each CP separately.

Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may

be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command

Availability" for details.

Operands This command has the following operands:

-s | -show Displays the audit log on the switch or the CP.

-c | -clear Clears the audit log on the switch or the CP.

Examples To display the audit log:

switch:admin> auditdump -s

0 AUDIT, 2008/08/11-13:14:53 (UTC), [SULB-1003], INFO, FIRMWARE,

NONE/NONE/NONE/None/CLI, None/sw48000_100/FID CHASSIS, ,

Firmwarecommit has started.

1 AUDIT, 2008/08/11-13:16:12 (UTC), [SULB-1003], INFO, FIRMWARE,

NONE/NONE/NONE/None/CLI, None/sw48000_100/FID CHASSIS, ,

Firmwarecommit has started.

2 AUDIT, 2008/08/11-13:17:30 (UTC), [SULB-1003], INFO, FIRMWARE,

NONE/NONE/NONE/None/CLI, None/sw48000_100/FID CHASSIS, ,

Firmwarecommit has started.

[output truncated]

To clear the audit log:

switch:admin> auditdump -C