Brocade Fabric OS Command Reference Manual Supporting Fabric OS v6.3.0 (53-1001337-01, July 2009)

Fabric OS Command Reference 731
53-1001337-01
portStatsShow
2
ge_stat_tx_pause_frms
The number of pause frames transmitted on the GbE port.
ge_stat_rx_frms The number of frames received on the GbE port.
ge_stat_rx_octets The number of octets received on the GbE port.
ge_stat_rx_ucast_frms
The number of unicast frames received on the GbE port.
ge_stat_rx_mcast_frms
The number of multicast frames received on the GbE port.
ge_stat_rx_bcast_frms
The number of broadcast frames received on the GbE port.
ge_stat_rx_vlan_frms
The number of VLAN frames received on the GbE port.
ge_stat_rx_pause_frms
The number of pause frames received on the GbE port.
ge_err_carrier The number of times the GbE port lost carrier sense.
ge_err_length The number of times an invalid length error was observed on the GbE port.
ge_err_crc The number of CRC Errors received on the GbE port.
ge_err_abort The number of frames aborted on the GbE port.
ge_err_overrun The number of overruns observed on the GbE port.
ge_err_fifo_ovf The number of times an overflow of the first in first out (FIFO) queue was
observed on the GbE port.
ip_err_hdr_cksum The number of checksum errors observed on the GbE port.
ip_err_tcp_data_chksum
The number of IP TCP data checksum errors observed on the GbE port.
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
This command is not supported on FCoE ports.
Operands This command has the following operands:
slotnumber For bladed systems only, specifies the slot number of the port to be displayed,
followed by a slash (/).
[ge]portnumber Specifies the number of the port for which to display the statistics, relative to
its slot for bladed systems. Specify the optional ge option to display the GbE
port hardware statistics. Use switchShow to display a list of valid ports.
ge Displays the GbE port statistics.
ip Displays all GbE port statistics related to IP addresses that are on (not zero).
This operand is not supported on the Brocade 7800 and FX8-24 platforms.