Brocade Fabric OS Command Reference Manual Supporting Fabric OS v6.3.0 (53-1001337-01, July 2009)

622 Fabric OS Command Reference
53-1001337-01
portCfgPersistentDisable
2
index_number| index_range
Specifies the index number or a range of index numbers (index1-index2) for
the ports to be persistently disabled. Port index ranges are supported only if
PortSwap is disabled.
Examples To disable a single port persistently:
switch:admin> portcfgpersistentdisable 2/4
To disable a range of ports persistently:
switch:admin> portcfgpersistentdisable 2/4-8
To disable multiple port ranges persistently:
switch:admin> portcfgpersistentdisable 2/24-26 3/10-12 4/3-4
To disable a port persistently by specifying its index number:
switch:admin> portcfgpersistentdisable 176
To disable a range of ports persistently by specifying the corresponding port index range:
switch:admin> portcfgpersistentdisable 17-18
To disable multiple ports persistently by specifying multiple port index ranges:
switch:admin> portcfgpersistentdisable 17-18 30-39
To display the persistently disabled ports on the switch:
switch:admin> portcfgpersistentdisable
Slot 0 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
---------+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---
Disabled - - - - - - - - - - - - - - - -
Slot 0 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
---------+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---
Disabled - YES YES - - - - - - - - - - - YES YES
Slot 0 32 33 34 35 36 37 38 39
---------+---+---+---+---+---+---+---+---
Disabled YES YES YES YES YES YES YES YES
See Also ficonCupSet, ficonCupShow, portCfgDefault, portDisable, portEnable, portCfgPersistentEnable,
portShow, switchShow