Brocade Fabric OS Command Reference Manual Supporting Fabric OS v6.3.0 (53-1001337-01, July 2009)

Fabric OS Command Reference 29

53-1001337-01

switch:admin> ag --policyshow

AG Policy Policy_Name State

------------------------------------------------------------------

Port Grouping pg Disabled

Auto Port Configuration auto Enabled

Advanced Device Security ads Enabled

------------------------------------------------------------------

2. To enable a port grouping policy:

switch:admin> ag --policyenable pg

3. To disable a port grouping policy

switch:admin> ag --policydisable pg

4. To enable auto port configuration policy when both policies are disabled and the switch is

already disabled:

switch:admin> ag --policyenable auto

All Port related configurations will be lost.

Please save the current configuration using configupload.

Do you want to continue? (yes, y, no, n): [no] y

5. To disable auto port configuration policy when the switch is disabled:

switch:admin> ag --policydisable auto

Default factory settings will be restored.

Default mappings will come into effect.

Please save the current configuration using configupload.

Do you want to continue? (yes, y, no, n): [no] y

Access Gateway configuration has been restored to factory default

6. To enable ADS policy:

switch:admin> ag --policyenable ads

The policy ADS is enabled

7. To disable ADS policy:

switch:admin> ag --policydisable ads

The policy ADS is disabled

AG port mapping commands

1. To display current port mappings and port grouping policies:

switch:admin> ag --mapshow

N_Port Configured_F_Ports Current_F_Ports Failover Failback PG_ID PG_Name

-----------------------------------------------------------------------------

0 4;5;6 4;5;6 1 0 2 SecondFabric

1 7;8;9 7;8;9 0 1 0 pg0

2 10;11 10;11 1 0 2 SecondFabric

3 12;13 12;13 0 1 0 pg0

-----------------------------------------------------------------------------