Brocade Fabric OS Command Reference Manual Supporting Fabric OS v6.3.0 (53-1001337-01, July 2009)

Fabric OS Command Reference 491

53-1001337-01

myId

Displays the current login session details.

Synopsis myid

Description Use this command to display the status of the system and the login session details. This includes

IPv4 or IPv6 addresses associated with the login session.

The login session gives details of the following:

• CP/switch (or console/serial port) used to log in.

• The IP address of the current login session for Telnet or the name of the current console port or

the serial port (if modem login used).

• The current CP mode (Active, Standby, or Unknown).

• The current system status (Redundant, Non-Redundant, or Unknown).

Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may

be in place. Refer to chapter 1, "Using Fabric OS Commands" and Appendix A, "Command

Availability" for details.

Operands none

Examples To display current login information:

switch:admin> myid

Current Switch: switch

Session Detail: switch (123.123.123.123) Active Redundant