Brocade Fabric OS Command Reference Manual Supporting Fabric OS v6.3.0 (53-1001337-01, July 2009)

188 Fabric OS Command Reference

53-1001337-01

diagHelp

Displays diagnostic command information.

Synopsis diaghelp

Description Use this command to display a short description of diagnostic commands.

Use default operands when running diagnostics commands. Non-default settings require detailed

knowledge of the underlying hardware and are intended for support personnel only. Contact

support if you want to use these operands.

Note The diaghelp command displays diagnostic commands that may not be available. Execute help

command to verify availability.

The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may

be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command

Availability" for details.

Operands none

Examples To display diagnostic command information:

switch:admin> diaghelp

bpportloopbacktest Functional test of port via blade processor path.

bpturboramtest MBIST test for AP blade BP ASICs

ceeportloopbacktest Functional test of port N->N path.

ceeturboramtest MBIST test for ASICs

(output truncated)