Brocade Fabric OS Command Reference Manual Supporting Fabric OS v6.3.0 (53-1001337-01, July 2009)

Fabric OS Command Reference 187

53-1001337-01

diagEnablePost

Enables power-on self-test (POST) execution at next reboot.

Synopsis diagenablepost

Description Use this command to enable POST. A reboot is not required for this command to take effect. POST

includes two phases: POST Phase I mainly tests hardware and POST Phase II tests system

functionality.

Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may

be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command

Availability" for details.

Operands none

Examples To enable the POST:

switch:admin> diagenablepost

Config update Succeeded

Diagnostic POST is now enabled.