Brocade Fabric OS Command Reference Manual Supporting Fabric OS v6.3.0 (53-1001337-01, July 2009)

Fabric OS Command Reference 155
53-1001337-01
cryptoCfg
2
- Host (initiator) PID: hoist PID
- VI: virtual initiator port WWN and node WWN
- VI PID: virtual initiator PID
- LUN Number: numeric identifier
- LUN Serial Number: alpha-numeric identifier
- Percentage complete: numeric value
- Re-Key state displays one of the following:
• Read Phase
• Write Phase
• HA Sync Phase
• LUN Cleanup
- Re-key role: Primary or Backup
- Block Size: in KB
- Current logical block address (LBA) being processed: block address
Use the --show -rekey crypto_target_container_name LUN_Num initiator_PWWN command to
display all re-key sessions in progress for a specific Crypto LUN/initiator pair of a specific
CryptoTarget container. The display includes the following information:
• LUN number: numeric ID
• LUN Serial Number (SN): alpha-numeric label
• CryptoTarget container Name: user-defined name
• Target: target port WWN and node WWN
• Target PID: target PID
• EE node name: node WWN
• EE slot: slot number
• Number of re-key sessions in progress: numeric value
• For each re-key session the display includes:
- Re-Key session number: numeric value
- Percent completion: numeric value
- Re-Key state. Displays one of the following:
• Re-Key Setup
• LUN Prep
• Key Update
- Operation in progress. Displays one of the following:
• Read Phase
• Write Phase
• HA Sync Phase
• LUN Cleanup
- VI: virtual initiator port WWN and node WWN
- VI PID: virtual initiator PID
- Number of blocks: numeric value