Brocade Fabric OS Command Reference Manual Supporting Fabric OS v6.3.0 (53-1001337-01, July 2009)

Fabric OS Command Reference 149
53-1001337-01
cryptoCfg
2
cryptocfg --modify -LUN crypto_target_container_name LUN_Num initiator_PWWN
[-encryption_format native | DF_compatible]
[-encrypt | -cleartext]
[-enable_encexistingdata | -disable_encexistingdata]
[-enablerekey time_period | -disable_rekey]
cryptocfg --remove -LUN crypto_target_container_name LUN_Num initiator_PWWN
cryptocfg --enable -LUN crypto_target_container_name LUN_Num initiator_PWWN
cryptocfg --create -tapepool -label pool_label | -num pool_num
[-encryption_format native | DF_compatible]
[-encrypt | -cleartext]
[-key_lifespan time_in_days | none]
cryptocfg --delete -tapepool -label pool_label | -num pool_num
cryptocfg --modify -tapepool -label pool_label | -num pool_num
[-encryption_format native | DF_compatible]
[-encrypt | -cleartext]
cryptocfg --manual_rekey crypto_target_container_name LUN_Num initiator_PWWN
cryptocfg --manual_rekey -all
cryptocfg --resume_rekey crypto_target_container_name LUN_Num initiator_PWWN
cryptocfg --discoverLUN crypto_target_container_name
cryptocfg --show -container -all -cfg | -stat
cryptocfg --show -container crypto_target_container_name -cfg | -stat
cryptocfg --show -tapepool -all
| -label pool_label |-num pool_num -cfg | -stat
cryptocfg --show -LUN crypto_target_container_name LUN_Num initiator_PWWN -cfg | -stat
cryptocfg --show -rekey -all
cryptocfg --show -rekey crypto_target_container_name
cryptocfg --show -rekey crypto_target_container_name LUN_Num initiator_PWWN
cryptocfg --show -tape_sessions -all
cryptocfg --show -tape_sessions crypto_target_container_name
cryptocfg --clearstats -container [-all | crypto_target_container_name ]
cryptocfg --clearstats -LUN crypto_target_container_name LUN_Num initiator_PWWN
Description Use these cryptoCfg commands to configure and manage tape or disk devices that store the
encrypted and compressed data.
A CryptoTarget container (CTC) is a configuration of “virtual devices” that is created for each target
port hosted on a Brocade Encryption Switch or FS8-18 blade. The container holds the configuration
information for a single target, including associated hosts and LUN settings. A CryptoTarget
container interfaces between the encryption engine, the external storage devices (targets), and the
initiators (hosts) that can access the storage devices through the target ports.
Virtual devices redirect the traffic between host and target/LUN to encryption engines so they can
perform cryptographic operations. To enable frame redirection, you must create a target-initiator
zone prior to performing any CryptoTarget container configuration.