Brocade Fabric OS Command Reference Manual Supporting Fabric OS v6.3.0 (53-1001337-01, July 2009)

ManualsBrandsHP ManualsStorageBrocade 8/24c SAN Switch for BladeSystem c-Class

151

152

153

154

155

156

157

158

159

160

Fabric OS Command Reference 127

53-1001337-01

configure

Descriptions of the Arbitrated Loop Parameter fields are as follows:

Send FAN frames? Specifies that fabric address notification (FAN) frames be sent to public loop

devices to notify them of their node ID and address. When set to 1, frames

are sent; when set to 0, frames are not sent.

Enable CLOSE on OPEN received?

If this is set, a CLS is returned immediately to an OPN if no buffers are

available. This is required for TachLite.

Always send RSCN? Following the completion of loop initialization, a remote state change

notification (RSCN) is issued when FL_Ports detect the presence of new

devices or the absence of pre-existing devices. When set to 1, an RSCN is

issued upon completion of loop initialization, regardless of the presence or

absence of new or pre-existing devices.

System Services Settings

Settings affecting System Services are described in Table 8.

TABLE 8 Disable RLS probing

Disable RLS probing Enables or disables the read link status (RLS) probing. Performed by the FCP

daemon, RLS probing reads the link error block from the device. This

extended link services command is defined by the FC standards. Refer to the

FC standards for information. This parameter is enabled (“on”) by default;

“off” disables RLS probing.

Portlog Events Enable/Disable Settings

These settings determine whether or not various types of port events are logged.

Each event type displayed on the screen is enabled by default (“on”). When disabled, this event is

not logged by the port log.

Application Attributes

Table 9 lists configurable application attributes. By default, all application attributes are enabled.

Field Type Default Range

Disable RLS probing

Boolean off off or on

TABLE 9 Configurable application attributes

Application File Type Default Range

ssl Certificate File string not set varies

CA Certificate File string not set varies

Length of crypto key number 128 40, 56, 128

rpcd Secure RPCd Callback secret string none varies

Webtools Basic User Enabled boolean no no/yes

Perform License Checking and Warning boolean yes yes/no

Allow Fabric Event Collection boolean yes yes/no