Brocade Fabric OS Command Reference Manual Supporting Fabric OS v6.3.0 (53-1001337-01, July 2009)

Fabric OS Command Reference 91

53-1001337-01

cfgTransShow

Displays information about the current zoning transaction.

Synopsis cfgtransshow

Description Use this command to display the ID of the current zoning transaction. In addition, the command

provides information on whether or not the transaction can be aborted. The transaction cannot be

aborted if it is an internal zoning transaction.

Notes The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may

be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command

Availability" for details.

When an FCS policy is enabled, this command can be issued only from the primary FCS switch.

Operands none

Examples To display the current transaction:

switch:admin> cfgtransshow

There is no outstanding zone transaction

switch:admin> cfgclear

Do you really want to clear all configurations? (yes, y, no, n): [no] y

Clearing All zoning configurations...

switch:admin> cfgtransshow

Current transaction token is 271010736

It is abortable

See Also cfgAdd, cfgClear, cfgCreate, cfgDelete, cfgDisable, cfgEnable, cfgRemove, cfgSave, cfgShow,

cfgTransAbort