Brocade Fabric OS Administrator's Guide Supporting Fabric OS v6.3.0 (53-1001336-02, November 2009)

Fabric OS Administrator’s Guide 45
53-1001336-02
Track and control switch changes
2
CP 0 1
Blade 0 1
Flash 0 1
MarginalPorts 2 1
FaultyPorts 2 1
MissingSFPs 0 0
Setting the switch status policy threshold values
1. Connect to the switch and log in using an account assigned to the admin role.
2. Enter the switchStatusPolicySet command.
The current switch status policy parameter values are displayed. You are prompted to enter
values for each DOWN and MARGINAL threshold parameter.
NOTE
By setting the DOWN and MARGINAL values for a parameter to 0,0 that parameter is no longer
used in setting the overall status for the switch.
3. Verify the threshold settings you have configured for each parameter.
Enter the switchStatusPolicyShow command to view your current switch status policy
configuration.
Example output from a switch.
The following example displays what is seen from a Brocade 300, 4100, 4900, 5000, 5410, 5424,
5450, 5460, 5470, 5480, 5100, 5300, 5424, 7500, 7500E, 7600, 7800 and 8000 switch.
switch:admin> switchstatuspolicyset
To change the overall switch status policy parameters
The current overall switch status policy parameters:
Down Marginal
----------------------------------
PowerSupplies 2 1
Temperatures 2 1
Fans 2 1
Flash 0 1
MarginalPorts 2 1
FaultyPorts 2 1
MissingSFPs 0 0
Note that the value, 0, for a parameter, means that it is
NOT used in the calculation.
** In addition, if the range of settable values in the prompt is (0..0),
** the policy parameter is NOT applicable to the switch.
** Simply hit the Return key.
Bad PowerSupplies contributing to DOWN status: (0..2) [2] 0
Bad PowerSupplies contributing to MARGINAL status: (0..2) [1] 0
Bad Temperatures contributing to DOWN status: (0..6) [2] 0
Bad Temperatures contributing to MARGINAL status: (0..6) [1] 0
Bad Fans contributing to DOWN status: (0..3) [2] 0
Bad Fans contributing to MARGINAL status: (0..3) [1] 0
Out of range Flash contributing to DOWN status: (0..1) [0] 0
Out of range Flash contributing to MARGINAL status: (0..1) [1] 0
MarginalPorts contributing to DOWN status: (0..32) [2] 0