Brocade Fabric OS Administrator's Guide Supporting Fabric OS v6.3.0 (53-1001336-02, November 2009)

Fabric OS Administrator’s Guide 363
53-1001336-02
SAN management with Admin Domains
15
See “Validating a zone” on page 241 for instructions on using the zone --validate command. For
more information about the zone command and its use with Admin Domains, see the Fabric OS
Command Reference.
NOTE
AD zone databases do not have an enforced size limit. The zone database size is calculated by the
upper limit of the AD membership definition and the sum of all the zone databases for each AD.
Admin Domains support the default zone mode of noaccess only. Before configuring any Admin
Domain, you must set the default zone to noaccess mode. Admin Domains without effective zone
configurations are presented with noaccess. See “Default zoning mode” on page 242 for more
information.
If the administrative domain feature is not active (AD1–AD254 are not configured and no explicit
members are added to AD0), AD0 supports both allaccess and noaccess default zone modes.
Admin Domains introduce two types of zone database nomenclature and behavior:
• Root zone database
If you do not use Admin Domains, there is only one zone database. This legacy zone database
is known as the root zone database. If you create Admin Domains, several zone databases
exist: the root zone database, which is owned by AD0, and other zone databases, one for each
user-defined Admin Domain.
AD-level zone information is merged with the root zone configuration and enforced.
• Zone databases
The Admin Domains each have separate zone databases and zone transaction buffers. You
can concurrently edit the separate zone databases. The AD zone database also has the
following characteristics:
- Each Admin Domain (AD1 through AD254) has its own zone definitions. These zone
definitions include defined and effective zone configurations and all related zone objects
including zones, zone aliases, and zone members. For example, you can define a zone
name of test_z1 in more than one Admin Domain.
- Each zone database has its own namespace.
- There is no zone database linked to the physical fabric (AD255) and no support for zone
database updates. In the physical fabric context (AD255), you can only view the complete
hierarchical zone database, which is made up of the zone databases in AD0 through
AD254.
- With AD support, zoning updates are supported selectively at each AD level. For example,
a zone change in AD1 results in an update request only for the AD1 zone database.
Admin Domains and LSAN zones
LSANs under each Admin Domain are collated into a single name space and sent out to FCR
phantom domains using the following format:
<original_LSAN_name>_AD<AD_num>
For example, a zone with name lsan_for_linux_farm in AD5 is internally converted to
lsan_for_linux_farm_AD005.
LSAN zone names in AD0 are never converted for backward compatibility reasons.