Brocade Fabric OS Administrator's Guide Supporting Fabric OS v6.3.0 (53-1001336-02, November 2009)

286 Fabric OS Administrator’s Guide
53-1001336-02
iSCSI FC zoning overview
12
Share Area: No
Device Shared in Other AD: No
N 012c00; 3;50:06:06:9e:00:15:63:20;50:06:06:9e:00:15:63:21; na
FC4s: FCP
PortSymb: [23] "iSCSI Virtual Initiator"
NodeSymb: [51] "IPAddr: 30.0.127.34 Slot/Port: 3/ge4 Logical pn: 44"
Fabric Port Name: 00:00:00:00:00:00:00:00
Permanent Port Name: 50:06:06:9e:00:15:63:20
Port Index: 44
Share Area: No
Device Shared in Other AD: No
N 012d00; 3;50:06:06:9e:00:15:63:28;50:06:06:9e:00:15:63:29; na
FC4s: FCP
PortSymb: [23] "iSCSI Virtual Initiator"
NodeSymb: [51] "IPAddr: 30.0.127.35 Slot/Port: 3/ge5 Logical pn: 45"
Fabric Port Name: 00:00:00:00:00:00:00:00
Permanent Port Name: 50:06:06:9e:00:15:63:28
Port Index: 45
Share Area: No
Device Shared in Other AD: No
N 012e00; 3;50:06:06:9e:00:15:63:30;50:06:06:9e:00:15:63:31; na
FC4s: FCP
PortSymb: [23] "iSCSI Virtual Initiator"
NodeSymb: [51] "IPAddr: 30.0.127.36 Slot/Port: 3/ge6 Logical pn: 46"
Fabric Port Name: 00:00:00:00:00:00:00:00
Permanent Port Name: 50:06:06:9e:00:15:63:30
Port Index: 46
Share Area: No
Device Shared in Other AD: No
N 012f00; 3;50:06:06:9e:00:15:63:38;50:06:06:9e:00:15:63:39; na
FC4s: FCP
PortSymb: [23] "iSCSI Virtual Initiator"
NodeSymb: [51] "IPAddr: 30.0.127.37 Slot/Port: 3/ge7 Logical pn: 47"
Fabric Port Name: 00:00:00:00:00:00:00:00
Permanent Port Name: 50:06:06:9e:00:15:63:38
Port Index: 47
Share Area: No
Device Shared in Other AD: No
The Local Name Server has 11 entries }
5. Write down or copy and paste the WWN information, which you will use for the aliCreate
command.
To display the FC target WWNs for switches other than the Brocade 48000, telnet into that
switch and run the nsShow command. Record the WWN information displayed.
6. Enter the aliCreate command to create zone aliases. Zone aliases are much easier to use than
long strings of WWN information. The two examples below create aliases for the FC virtual
targets and for the iSCSI virtual initiators:
switch:admin> alicreate ISCSI_TARGETS, "21:00:00:04:cf:e7:74:cf;
21:00:00:04:cf:e7:73:7e; 2f:ff:00:06:2b:0d:12:99"
switch:admin> alicreate ISCSI_VI_SWITCH1_SLOT3, "50:06:06:9e:00:15:63:00;
50:06:06:9e:00:15:63:08; 50:06:06:9e:00:15:63:10; 50:06:06:9e:00:15:63:18;
50:06:06:9e:00:15:63:20; 50:06:06:9e:00:15:63:28; 50:06:06:9e:00:15:63:30;
50:06:06:9e:00:15:63:38"
7. Enter th e cfgSave command.