Brocade Fabric OS Administrator's Guide Supporting Fabric OS v6.3.0 (53-1001336-02, November 2009)

Fabric OS Administrator’s Guide 273
53-1001336-02
iSCSI virtual target configuration
12
Name: iqn.2002-12.com.brocade:2f:5f:00:06:2b:0d:10:ba
State/Status: Online/Defined
Name: iqn.2002-12.com.brocade:2f:7f:00:06:2b:0d:10:ba
State/Status: Online/Defined
Name: iqn.2002-12.com.brocade:2f:9f:00:06:2b:0d:10:ba
State/Status: Online/Defined
Name: iqn.2002-12.com.brocade:2f:bf:00:06:2b:0d:10:ba
State/Status: Online/Defined
Name: iqn.2002-12.com.brocade:2f:df:00:06:2b:0d:10:ba
State/Status: Online/Defined
Name: iqn.2002-12.com.brocade:2f:ff:00:06:2b:0d:12:9a
State/Status: Online/Defined
Generating an iSCSI VT for a specific FC target
1. Connect and log in to the switch.
2. Enter the iscsiCfg
--easycreate tgt command with the -w port WWN option to create an iSCSI
VT that contains only the storage attached to the specified WWN. The default value of
iqn.2002-12.com.brocade, is used for the fixed prefix, and the port WWN is used as the
user-defined portion of the IQN.
The following is an example.
switch:admin> iscsicfg --easycreate tgt -w 21:00:00:04:cf:e7:74:cf
IndexFC WWN iSCSIName Status
21:00:00:04:cf:e7:74:cf iqn.2002-10.com.brocade:21:00:00:04:cf:e7:74:cf
Operation Succeeded
3. Enter the iscsiCfg --show tgt command to display the status of the created iSCSI VTs:
The following is an example.
switch:admin> iscsicfg --show tgt
Number of records found: 1
Name: iqn.2002-10.com.brocade:21:00:00:04:cf:e7:74:cf
State/Status:Online/Defined
Auth. Method:None
Manual iSCSI VT creation
Create iSCSI VTs manually when there are FC targets on the fabric that should not be mapped to an
iSCSI VT and if you want to map more than one target to the same iSCSI VT or a LUN to an iSCSI VT.
Up to 256 LUNs can be mapped to an iSCSI VT.
1. Connect and log in to the switch.
2. Enter the iscsiCfg
--create tgt command with the -t IQN option to create an undefined iSCSI VT,
that is, an iSCSI VT that contains no LUNs. The IQN value is an iSCSI Qualified Name entered in
the form
type.date.naming authority:user_defined. The following is an example, using the
Brocade default for the
type.date.naming authority: prefix portion of the IQN, followed by
a WWN as the user defined portion.