Brocade Fabric OS Administrator's Guide Supporting Fabric OS v6.3.0 (53-1001336-02, November 2009)

248 Fabric OS Administrator’s Guide
53-1001336-02
Zoning configurations
11
21:00:00:20:37:0c:71:02
1,2
21:00:00:20:37:0c:76:22
21:00:00:20:37:0c:76:28
zone: Purple_zone
1,0
21:00:00:20:37:0c:76:85
21:00:00:20:37:0c:71:df
Viewing selected zone configuration information
1. Connect to the switch and log in as admin.
2. Enter the cfgShow command and specify a pattern.
cfgshow "pattern"[, mode]
Example
The following example displays all zone configurations that start with “Test”:
switch:admin> cfgshow "Test*"
cfg: Test1 Blue_zone
cfg: Test_cfg Purple_zone; Blue_zone
Viewing the configuration in the effective zone database
1. Connect to the switch and log in as admin.
2. Enter the cfgActvShow command.
Example
switch:admin> cfgactvshow
Effective configuration:
cfg: NEW_cfg
zone: Blue_zone
1,1
21:00:00:20:37:0c:76:8c
21:00:00:20:37:0c:71:02
1,2
21:00:00:20:37:0c:76:22
21:00:00:20:37:0c:76:28
zone: Purple_zone
1,0
21:00:00:20:37:0c:76:85
21:00:00:20:37:0c:71:df
Clearing all zone configurations
1. Connect to the switch and log in as admin.
2. Enter the cfgClear command to clear all zone information in the transaction buffer.
ATTENTION
Be careful using the cfgClear command because it deletes the defined configuration.
switch:admin> cfgclear