Brocade Fabric OS Administrator's Guide Supporting Fabric OS v6.3.0 (53-1001336-02, November 2009)

Fabric OS Administrator’s Guide 121
53-1001336-02
Listener applications
6
Listener applications
Brocade switches block Linux subsystem listener applications that are not used to implement
supported features and capabilities. Table 20 lists the listener applications that Brocade switches
either block or do not start.
Ports and applications used by switches
If you are using the FC-FC Routing Service, be aware that the secModeEnable command is not
supported in Fabric OS v6.1.0 and later.
Table 21 lists the defaults for accessing hosts, devices, switches, and zones.
TABLE 20 Blocked listener applications
Listener application Brocade 48000 director and Brocade DCX
enterprise-class platforms
Brocade 300, 4100, 4900, 5000, 5410, 5424,
5450, 5460, 5470, 5480, 5100, 5300, 5424,
7500, 7500E, 7600, 7800 and 8000 switches.;
FA4-18, FC4-16, FC4-16IP, FC4-32, FC4-48,
FC8-16, FC8-32, FC8-48, FC10-6, FCOE10-24,
FR4-18i, FS8-18, and FX8-24 blades
chargen Disabled Disabled
echo Disabled Disabled
daytime Disabled Disabled
discard Disabled Disabled
ftp Disabled Disabled
rexec Block with packet filter Disabled
rsh Block with packet filter Disabled
rlogin Block with packet filter Disabled
time Block with packet filter Disabled
rstats Disabled Disabled
rusers Disabled Disabled
TABLE 21 Access defaults
Access default
Hosts Any host can access the fabric by SNMP.
Any host can Telnet to any switch in the fabric.
Any host can establish an HTTP connection to any switch in the fabric.
Any host can establish an API connection to any switch in the fabric.
Devices All devices can access the management server.
Any device can connect to any FC port in the fabric.
Switch access Any switch can join the fabric.
All switches in the fabric can be accessed through a serial port.
Zoning No zoning is enabled.