Brocade EZSwitchSetup Administrator's Guide v6.1.0 (53-1000607-02, June 2008)

EZSwitchSetup Administrator’s Guide 19
53-1000607-02
Connecting devices and completing the setup
2
FIGURE 14 Configure Ports and Connect Devices Screen
Connecting devices and completing the setup
1. Install the small form factor pluggable (SFP) transceivers in the Fibre Channel ports shown
onscreen. (See Figure 15 on page 20).
a. Remove any protector plugs from the SFP transceivers to be used.
b. Position and insert each SFP transceiver as required (right side up in the top row of ports
and upside down in the bottom row of ports) until it is firmly seated.
c. Close the latching bale.