Brocade EZSwitchSetup Administrator's Guide v6.1.0 (53-1000607-02, June 2008)

EZSwitchSetup Administrator’s Guide 13
53-1000607-02
Setting the switch IP address
2
FIGURE 9 Assign a static IP
Setting a static IP address
If you need to set up a static IP address, take the following steps.
1. Select Yes under Do you want to set a static IP address to the switch? (see Figure 9).
2. Click Continue.
A dialog box is displayed.
3. Enter the static IP addresses you want to use.
4. Click Continue.
EZSwitchSetup verifies that the IP addresses are available to use on the network and sets the
IP addresses on to the switch. When the IP addresses are verified and set, the Confirmation
screen displays (see Figure 10 on page 14).