Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, June 2008)

380 Fabric OS Message Reference
53-1000600-02
SEC-1076
66
Probable Cause Indicates that there has been a corruption during the distribution of the security database. This can
only occur when the primary fabric configurations server (FCS) is distributing the security database
to the other switches in the fabric and local validation finds that there is an error in the security
database. This is a rare occurrence.
Recommended
Action
Run the secFabricShow command to verify that the fabric is still consistent. All the switches should
be in the ready state. If a switch is in the error state, the database might not be correctly updated
for that specific switch.
Severity ERROR
SEC-1076
Message <timestamp>, [SEC-1076], <sequence-number>,, ERROR, <system-name>,
NoNodeWWNZoning option has been changed.
Probable Cause Indicates that the NoNodeWWNZoning option has been changed. If the option is turned on, a zone
member can be added using node WWNs, but the member will not be able to communicate with
others nodes in the zone.
Recommended
Action
Reenable the current zone configuration for the change to take effect.
Severity ERROR
SEC-1077
Message <timestamp>, [SEC-1077], <sequence-number>,, ERROR, <system-name>, Failed to
activate new policy set on all switches.
Probable Cause Indicates that the policy could not be activated. Possible reasons that the policy could not be
activate include not enough memory or a busy switch.
Recommended
Action
Run the secFabricShow command to verify that all switches in the fabric are in the ready state.
Retry the command when all switches are ready.
Severity ERROR
SEC-1078
Message <timestamp>, [SEC-1078], <sequence-number>,, ERROR, <system-name>, No new data to
abort.
Probable Cause Indicates that there are no new changes in the defined security policy database that can be
aborted.
Recommended
Action
Verify that security event was planned. Verify if there were really any changes to the defined policy
database that can be aborted.
Severity ERROR