Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, June 2008)

222 Fabric OS Message Reference
53-1000600-02
FW-1245
30
Probable Cause Indicates that the number of end-to-end (EE) word frames that the switch receives has changed.
Receive performance messages appear due to the number of word frames that travel from the
configured S_ID to the D_ID pair.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity INFO
FW-1245
Message <timestamp>, [FW-1245], <sequence-number>,, INFO, <system-name>, <Label>, is
below low boundary(High=<High value>, Low=<Low value>). Current value is <Value>
<Unit>.
Probable Cause Indicates that the number of end-to-end (EE) word frames that the switch receives has fallen below
the low boundary. Receive performance messages appear due to the number of word frames that
travel from the configured S_ID to the D_ID pair.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity INFO
FW-1246
Message <timestamp>, [FW-1246], <sequence-number>,, INFO, <system-name>, <Label>, is
above high boundary(High=<High value>, Low=<Low value>). Current value is <Value>
<Unit>.
Probable Cause Indicates that the number of end-to-end (EE) word frames that the switch receives has risen above
the high boundary. Receive performance messages appear due to the number of word frames that
travel from the configured S_ID to the D_ID pair.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity INFO
FW-1247
Message <timestamp>, [FW-1247], <sequence-number>,, INFO, <system-name>, <Label>, is
between high and low boundaries(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Probable Cause Indicates that the number of end-to-end (EE) word frames that the switch receives has changed
from a value outside of the acceptable range to a value within the acceptable range. Receive
performance messages appear due to the number of word frames that travel from the configured
S_ID to the D_ID pair.