Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, June 2008)

162 Fabric OS Message Reference
53-1000600-02
FICN-1048
23
FICN-1048
Message <timestamp>, [FICN-1048], <sequence-number>,, WARNING, <system-name>,
DevDiskEgr:FICON Cancel received Path=<FICON PATH> state=0x<Current emulation
state of the FICON device> sflags=0x<The current emulation status flags>.
Probable Cause The operator has cancelled a read or write job.
Recommended
Action
This is an unexpected event, please contact your vendor's customer support for assistance.
Severity WARNING
FICN-1049
Message <timestamp>, [FICN-1049], <sequence-number>,, WARNING, <system-name>,
ProcessIngTirData:Lost Logical Path for Path=<FICON PATH> Index=<Current
processing index in the TIR data from the locally connected channel or control
unit>.
Probable Cause A TIR received from a FICON end point indicates that it no longer has an established path to its
peer.
Recommended
Action
This is an unexpected event, please contact your vendor's customer support for assistance.
Severity WARNING
FICN-1050
Message <timestamp>, [FICN-1050], <sequence-number>,, WARNING, <system-name>,
ProcessEgrTirData:Lost Logical Path for Path=<FICON PATH> Index=<Current
processing index in the TIR data from the remotely connected channel or control
unit>.
Probable Cause A TIR received from a far side FICON end point indicates that it no longer has an established path to
its peer.
Recommended
Action
This is an unexpected event, please contact your vendor's customer support for assistance.
Severity WARNING
FICN-1051
Message <timestamp>, [FICN-1051], <sequence-number>,, INFO, <system-name>, XRC Session
Established: SessID=<SDM Assigned Session ID>, Path=<FICON PATH>.
Probable Cause An establish XRC session PSF command has been received to initiate an XRC session with the
extended DASD device.