Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, June 2008)

154 Fabric OS Message Reference
53-1000600-02
FICN-1019
23
FICN-1019
Message <timestamp>, [FICN-1019], <sequence-number>,, ERROR, <system-name>, DevTapeEgr:AS
Link Level Reject (LRJ) from Chan on Path=<FICON PATH> LastCmd=0x<the Last 4
commands issued to the device> LastStatus=0x<the Last 4 status values received
from the device>.
Probable Cause The FICON channel indicated in the path issued a LRJ frame for a sequence from the device.
Recommended
Action
If there was a job failure associated with this event, please contact your vendor's customer support
for assistance.
Severity ERROR
FICN-1020
Message <timestamp>, [FICN-1020], <sequence-number>,, ERROR, <system-name>,
DevTapeEgr:FICON Cancel received Path=<FICON PATH> state=0x<the current emulation
state for the device> tflags=0x<the current emulation tape control flags for the
device> sflags=0x<the current emulation status control flags for the device>.
Probable Cause The FICON channel issued a Cancel sequence for a device in emulation.
Recommended
Action
If there was an unexpected job failure associated with this event, please contact your vendor's
customer support for assistance.
Severity ERROR
FICN-1021
Message <timestamp>, [FICN-1021], <sequence-number>,, ERROR, <system-name>,
DevTapeEgr:FICON Tape Cancel:Path=<FICON PATH> Elapsed Time=<the current SIO time
in seconds for the device>.<the current SIO time in milliseconds for the device>
seconds.
Probable Cause The FICON channel issued a Cancel sequence for a device in emulation.
Recommended
Action
If there was an unexpected job failure associated with this event, please contact your vendor's
customer support for assistance.
Severity ERROR
FICN-1022
Message <timestamp>, [FICN-1022], <sequence-number>,, ERROR, <system-name>,
DevTapeEgr:FICON Selective Reset:Path=<FICON PATH> State=0x<the current state of
the device that received the selective reset> statArray=0x<the last 4 status
values received from the device> cmdArray=0x<the last 4 commands that were issued
to the device> tflags=0x<the current emulation tape control flags for the device>
sflags=0x<the current emulation status control flags for the device>.