Brocade 8Gb SAN Switch for HP BladeSystem c-Class User Guide

Table 9 8Gb SAN Switch physical dimensions
MeasurementDimension
29.3 mm (1.15 in)Height
208 mm (8.19 in)Width
280 mm (11.02 in)Depth
1.27 kg (2.8 lb)Weight
Environmental requirements
To ensure proper operation, the switch must not be subjected to environmental conditions beyond
those for which it was tested. The ranges specified in Table 10 (page 31) list the acceptable
environment for both operating and nonoperating conditions.
Table 10 Environmental requirements
Acceptable range during non-operationAcceptable range during operationCondition
-40°C to 70°C with maximum rate of change
of 20 C /hr
104°F/40 °C at sea level, derated 1 C per
1000 ft above sea level
Ambient temperature
50% to 80% relative humidity, non-condensing5% to 90% relative humidity, non-condensingHumidity
0 to 40,000 ft (12 km) above sea level0 to 10,000 ft (3 km) above sea levelAltitude
140 G, 2mS,40 G, 2mS durationShock
2.0 G, 5–500 Hz0.5 G, 10–500 HzVibration
None required47 cubic ft/minuteAirflow
Supported SFPs
Do not use unsupported SFPs. They may not fit correctly and may void your warranty. Any port
with an unsupported SFP will automatically be disabled by switch firmware, leaving the port
non-operational. See “Supported SFP transceiver options” (page 9) for a list of supported SFPs.
For a complete list of supported devices, refer to the latest version of the HP SAN Design Reference
Guide at the HP website:
http://h18000.www1.hp.com/products/storageworks/san/documentation.html
Supported HBAs
For a list of HBAs that have been tested and are known to work with the SAN switches, see the
latest version of the HP SAN Design Reference Guide at the HP website:
http://h18000.www1.hp.com/products/storageworks/san/documentation.html
Environmental requirements 31