Reference Guide

ManualsBrandsHP ManualsSoftwareHP Branch Intellectual Management System Software

IMC

Branch Intelligent Management System 7.0 (E0104)

Table of Contents

1. What's New in this Release

2. Problems Fixed in this Release

3. BIMS Software Distribution Contents

4. BIMS Software Features

5. Installation Prerequisites

6. Client Prerequisites

7. New Installation

8. Upgrade Installation

9. Un-Installation

10. Distributed Deployment

11. TCP Port Usage

12. Known Problems

What's New in this Release

The version IMC BIMS 7.0 (E0104) can be installed directly or upgraded from IMC BIMS 5.2

(E0401) and its patches versions, IMC BIMS 7.0 (E0101) and IMC BIMS 7.0 (E0102).

Features released in IMC BIMS 7.0 (E0104)

 Send alarms by message gateway.

 Exhibit device monitor data by charts.

 Add device up statistic report.

 View 3G signal strength of device in topology.

Features released in IMC BIMS 7.0 (E0102)

 CPE Alarm

o Configuration change alarming.

 Resource

o Matching a branch device by using BIMS username.

Summary of content (10 pages)

PAGE 1
IMC Branch Intelligent Management System 7.0 (E0104) Copyright (c) 2012-2013 Hewlett-Packard Development Company, L.P. and its licensors. Table of Contents 1. What's New in this Release 2. Problems Fixed in this Release 3. BIMS Software Distribution Contents 4. BIMS Software Features 5. Installation Prerequisites 6. Client Prerequisites 7. New Installation 8. Upgrade Installation 9. Un-Installation 10. Distributed Deployment 11. TCP Port Usage 12.
PAGE 2
  Configuration Management o Restore configuration by time. o Baseline software for CPE Type. System Configuration o Forward operation log to Syslog. Features released in IMC BIMS 5.2 (E0401H01)  None. Features released in IMC BIMS 5.2 (E0401)       Homepage o Traffic statistics trend graph-today. o Location view. o Top5 worst SIM card signal strength-today. o Top5 traffic of devices-this month. o Top5 SIM card offline duration-this month. Quick Start o Service processing.
PAGE 3
Problems Fixed in this Release IMC BIMS 7.0 (E0104) fixes the following problems after IMC BIMS 5.2 (E0401). Resolved Problems in IMC BIMS 7.0 (E0104) 1. When "Common Password Status" is enabled, there should be an option named "Change ACS Password to Random String". 2. CPE authenticated by ACS username cannot be imported. Resolved Problems in IMC BIMS 7.0 (E0102) 1. The menu and button of Data model pop window are all Chinese in HP English version. 2.
PAGE 4
1. BIMS\manual\readme_bims_7.0 (E0104).html - this file 2. BIMS\install - the BIMS installation program for Windows and Red Hat Enterprise Linux [ Table of Contents ] Installation Prerequisites Server Requirements The following are the minimum hardware and software requirements for running BIMS on a server:  Minimum hardware requirements o Pentium 4 3.
PAGE 5
o Red Hat Enterprise Linux 6.4 X64 (Enterprise and Standard versions only)  VMware: o VMware Workstation 6.5.x o VMware Workstation 9.0.x o VMware ESX Server 4.x o VMware ESX Server 5.
PAGE 6
[ Table of Contents ] Client Prerequisites PC Requirements  Minimum hardware requirements o Pentium 4 2.0GHz processor o 2048M of RAM o 50G hard disk space  Operating system o Windows XP SP3 or later  Browser o IE 9.0 or 10.0 is recommended. o Firefox 20 or later is recommended. o Chrome 26 or later is recommended. o Turn off the blocking settings in the browser. o Add the IMC website to the trusted sites of the browser. o The client resolution is 1280*768 at least. o JRE 1.6.
PAGE 7
[ Table of Contents ] Upgrade Installation This program can be upgraded from IMC BIMS 5.2 (E0401) and its patches versions, IMC BIMS 7.0 (E0101) and IMC BIMS 7.0 (E0102). Follow these instructions to upgrade IMC: 1. Back up the IMC database on the Environment tab in the Intelligent Deployment Monitoring Agent. 2. Stop the IMC system in the Intelligent Deployment Monitoring Agent. 3. Click Install on the Monitor tab of the Intelligent Deployment Monitoring Agent. 4.
PAGE 8
Distributed Deployment The BIMS ACS modules may be installed on more than one server to meet specific performance requirements. A typical scenario is where the system has one Master server with BIMS Platform deployed and multiple Slave servers with BIMS ACS modules deployed. To install the BIMS on a Slave Server, perform the following steps: 1. Select Start/All Programs/HP Intelligent Management Center/HP Deployment Monitoring Agent. 2.
PAGE 9
TCP 23 Telnet port, which the resource management module, ACL management module, and configuration center use to access the device through Telnet. TCP 25 SMTP port, which the resource management module uses to send alarms through email. ICMP ICMP port, which the resource management module uses to discover devices and check the reachability of the devices. UDP 69 IMC-specific tftp daemon. TCP 80 Used to launch the web network management system of the device.
PAGE 10
Issued: Dec 2013 Copyright (c) 2012-2013 Hewlett-Packard Development Company, L.P. and its licensors.