Specifications

Removal and replacement procedures 42
3.
Install the processor.
4. Close the processor locking lever.
5. Clean the old thermal grease from the heatsink and the top of the processor with the alcohol swab.
Allow the alcohol to evaporate before continuing.
6. Apply all the grease to the top of the processor in one of the following patterns to ensure even
distribution:
7. Install the heatsink.
8. Install the FBDIMMs.
9. Install the front panel/hard drive cage assembly.
10. Install the hard drive backplane.
11. Install the cache module.
12. Install the FBDIMM baffles.
13. Install the battery pack, if applicable.