Specifications

Removal and replacement procedures 32
To replace the component, reverse the removal procedure.
Server blade handle
To remove the component:
1. Power down the server blade (on page 23).
2. Remove the server blade (on page 24).
3. Remove the access panel ("Access panel" on page 25).
4. Remove all hard drives ("Hard drive" on page 27).
5. Remove all hard drive blanks ("Hard drive blank" on page 27).
6. Remove the front panel/hard drive cage assembly ("Front panel/hard drive cage assembly" on
page 31).
7. Remove the server blade handle.
To replace the component, reverse the removal procedure.
Release button
To remove the component:
1. Power down the server blade (on page 23).
2. Remove the server blade (on page 24).
3. Remove the access panel ("Access panel" on page 25).
4. Remove all hard drives ("Hard drive" on page 27).
5. Remove all hard drive blanks ("Hard drive blank" on page 27).
6. Remove the front panel/hard drive cage assembly ("Front panel/hard drive cage assembly" on
page 31).